The painting of the building with a brush
One of the most important and main painting tools in building painting services is the brush. Pens are produced and marketed in different sizes, shapes, thicknesses, and even different types of hair. For this reason, people who use brushes in building painting should first pay attention to the type of paint prepared and consider the extent and amount of work they are going to do. For example, the brush used in plastic paint. It is not suitable for oil paint, or small brushes cannot be used to paint large surfaces.
Although using a brush is one of the most common ways to paint a building, it is a bit difficult for people who want to paint a building and do not have special skills in this field. Because using it requires a lot of skill. To use a brush, one must have the necessary skills; so that he can start painting the building. Because otherwise, it will be faced with a striped surface that shows brush marks and color fading. However, using a brush in building painting also has advantages. The most important advantage of a brush is to cover uneven surfaces and eliminate bumps and depressions. If you are not skilled enough in using a brush, you will end up with a surface of faded colors that you cannot remove.
The painting of the building with rollers
One of the important and necessary tools for painting the building is the roller. Rollers, like brushes, are produced and supplied in different sizes and materials, and have made work easier and made changes in building painting. Rollers are divided into different categories and you can even choose your roller model based on the type of paint you choose.
The oil paint roller has a smaller diameter and the plastic paint roller has a larger diameter. But if you use acrylic paint to paint the building, then note that the diameter of our acrylic paint roller is between oil paint and plastic. To these three main types of rollers, you can add another type of roller, which is special for patina work and highlighted colors.
The rollers are different in terms of diameter and texture and are produced and marketed in different sizes for painting different surfaces such as frames, fences, walls, and their sizes range from 5 to 30 cm.
Due to its large diameter, plastic paint rollers are used in ceiling painting, and 5-10 cm size rollers are used for painting fences and small surfaces. Larger rollers are also used for walls. Using a roller in building painting can have many advantages and makes the work of the building painter easier.
The benefits of painting the building with rollers
- رنگ آمیزی ساختمان با غلطک سبب آسانتر شدن کار میشود.
- رنگ آمیزی با غلطک مهارت نمیخواهد.
- رنگ آمیزی با غلطک سرعت بیشتری به کار میدهد.
- رنگ آمیزی ساختمان با غلطک سبب میشود، سطح پوششی یکدست و تمیز داشته باشد.
However, painting the building with a roller is not without flaws. When painting the building with a roller, you cannot paint places such as the corner of the walls, the intersection of two walls, the ceiling, and special plastering. In these cases, a brush should be used to paint the building. Therefore, the most important disadvantage of painting the building with a roller is that it cannot be used alone to cover the walls and ceiling of a space. Rather, a suitable brush is needed to complete the color of the corners, angles, where the two surfaces of the wall and ceiling meet each other, and the recessed and prominent parts, etc.
Is the brush better or the rollers?
In the recent years when there was still no news about painting buildings with rollers, the majority of building painters used brushes to paint buildings, and because the use of brushes had many weaknesses, therefore, painting buildings was done in a good way. It could not be done and it required high skill. Because in most of the cases, the applied paint often faded or the brushes were not of the required quality, and finally after painting, you noticed that the paint was scratched on the ceiling or wall. It has made it much easier and has made the work quality good and the paint applied with the roller is covered on the surface in the best possible way.
With this explanation, it can be said that painting the building with a roller is better and you can have a clean and perfect job. However, it should be noted that using a roller is not always the best, and in some cases, to paint parts of the house where it is not possible to paint with a roller, other tools such as a brush should be used to paint them. . Therefore, it should be said that in painting the building with a roller, a brush should also be included to help the painter achieve the best results.